Fluke MDA-550 电机驱动分析仪风电加装储能充电宝，文章来源于福禄克公司， 风电是全球新能源格局中的重要一员，风电加装储能“充电宝”，能帮助解决风能发电系统的波动性和间歇性问题，并提高系统的灵活性和可靠性。现阶段来看，各种储能技术，如电化学储能、压缩空气储能，及热储能技术快速发张，成本逐渐降低，同时国家及地区都制定了推动储能应用的政策，从而进一步提升新能源的效率和系统可靠性。与此同时，行业也面临一些挑战，储能系统的容量对平衡风能发电系波动至关重要，但其容量仍有限制，无法满足某些大型风电场的需求；特别是储能模块于风能发电系统的集成更涉及复杂的工程问题，需要解决电网连接、电力管理、控制策略等问题；而且大型储能系统可能增加投资成本，从而影响新能源系统的经济性。 
Fluke MDA-550 motor drive analyzer wind power installed energy storage charging treasure, article from Fluke, wind power is an important member of the global new energy pattern, wind power installed energy storage "charging treasure", can help to solve the volatility of the wind power generation system and intermittent problems, and to improve the flexibility and reliability of the system. At this stage, a variety of energy storage technologies, such as electrochemical energy storage, compressed air energy storage, and thermal energy storage technology, rapid development of Zhang, the cost is gradually reduced, at the same time, the country and the region have formulated a policy to promote the application of energy storage, thereby further enhancing the efficiency of new energy and system reliability. At the same time, the industry is also facing some challenges, the capacity of the energy storage system is critical to balance the fluctuations of the wind power generation system, but its capacity is still limited to meet the needs of some large wind farms; in particular, the integration of the energy storage module in the wind power generation system involves complex engineering issues that need to be resolved, such as grid connection, power management, control strategies; and large-scale energy storage systems may increase the cost of investment, thereby This affects the economy of the new energy system.

储能电池的全生命周期维护，以及风电场的运营维护也是风电场的整体经济效益的重要组成，因此需要格外关注。风力涡轮机的安全性和可靠性至关重要。定期检查和测试使技术人员能够发现磨损、电气故障或机械故障的早期迹象。
The full life-cycle maintenance of storage batteries, as well as the operation and maintenance of wind farms, is also an important component of the overall economic performance of wind farms and therefore requires extra attention. The safety and reliability of wind turbines is of paramount importance. Regular inspections and tests enable technicians to detect early signs of wear and tear, electrical failures or mechanical breakdowns. 

风机永磁直驱系统：永磁高温、高湿环境下可能会失效。 Fan permanent magnet direct drive system: permanent magnet may fail under high temperature and high humidity environment.   风机风舵：随风自适应偏移带来扭缆隐患，扭缆后期散热变差，温度升高将加速老化，并随震动摩擦破坏线缆表层。  Fan wind rudder: with the wind adaptive offset brought about by the potential danger of twisted cable, twisted cable late heat dissipation becomes worse, the temperature will accelerate aging, and with the vibration of friction damage to the surface layer of the cable.  风机主轴：工作中会因摩擦升温。 Fan spindle: the work of the friction will rise in temperature.

MI3 在线式红外测温仪：体积小巧便于安装、分体式探头易于组网监测、多种通讯接口可选 Profibus/Modbus/Profinet 等，ThermoView 关键资产解决方案：全方位、全天候不间断监测、多台组网实现一体化管理、智能化可编程软件。
MI3 in-line infrared thermometer: compact size and easy to install, split probe easy to network monitoring, a variety of communication interfaces can be selected Profibus/Modbus/Profinet, etc., ThermoView key asset solutions: all-round, all-weather uninterrupted monitoring, multi-sets of the network to achieve integrated management, intelligent programmable software. 

风力发电驱动系统通常需要将发电的电能注入电网中。测试轴电压可以确保电机输出的电压符合电网的要求，避免对电网造成过大的电压波动或不稳定的电能注入。
Wind turbine drive systems often require the injection of generated power into the grid. Testing the shaft voltage ensures that the output voltage of the motor meets the requirements of the grid and avoids excessive voltage fluctuations or unstable power injection into the grid. 

Fluke MDA-550 电机驱动分析仪：电机驱动分析、波形分析、检测变频器输入输出、直流母线纹波、轴电压、捕捉瞬态过电压、谐波和三相不平衡测试。 
Fluke MDA-550 Motor Drive Analyzer: Motor drive analysis, waveform analysis, detects inverter inputs and outputs, DC bus ripple, shaft voltage, captures transient overvoltage, harmonics, and three-phase unbalance testing.

齿轮箱齿轮损伤主要分为微点蚀，胶合，静止压痕，短齿四类，可使用工业内窥镜在紧凑的发电机机舱中使用，直观地进行检测。
Gearbox gear damage is categorized into four main types: micropitting, gluing, static indentation, and short teeth, which can be detected visually using an industrial endoscope for use in compact generator nacelles. 

Fluke DS701/ DS703 FC 高分辨率工业诊断内窥镜：高清成像，可靠画质；便捷操作，操作体验优良。Fluke 810 振动分析仪：对常见机械故障（轴承、失中、不平衡、松动）实现板载识别和定位，通过总体振动等级，直接从诊断屏幕快速评估机器总体运行状况。Fluke 830 激光对中仪：单一激光测量技术，更好的数据准确性，直观的引导式用户界面，能快捷并轻松地完成机器对中。
Fluke DS701/ DS703 FC High-resolution Industrial Diagnostic Borescope: High-definition imaging, reliable picture quality; convenient operation, excellent operating experience.Fluke 810 Vibration Analyzer: On-board identification and localization of common mechanical faults (bearings, out-of-centre, unbalance, looseness), quick assessment of overall machine operation through overall vibration levels, directly from the diagnostic screen. Fluke 830 Laser Alignment Gauge: Single laser measurement technology for better data accuracy and an intuitive guided user interface for quick and easy machine alignment.

深圳银飞有售Fluke MDA-550 电机驱动分析仪