Agusta A109 NEXUS飞机大气数据测试仪适配器
NAV-AIDS公司自1960年代以来，专门为各种飞机提供空速管适配器和皮托管夹具，以及大气数据测试仪附件和套件。NAV-AIDS公司的主要产品包括空速管测试适配器和皮托管夹具，这些产品可以作为独立项目或飞机专用套件提供，包含所需的空速管和皮托管适配器、软管组件、预测试工具、控制台、备用密封件、润滑液、软管悬挂装置等。NAV-AIDS公司通过了ISO 9001:2015认证，确保其产品质量和服务的可靠性。
AIR DATA ACCESSORIES KIT MODEL No. ADA109C-723 AGUSTA A109 NEXUS
The kit contains the equipment required to test from source the complete pitot & static air data system on the Agusta A109 Nexus, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Static Test Adaptor
Part No. PS59872-4-6 (2 req’d.)
These units fit the pitot static probes 855GR located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT421-9872 (2 req’d.)
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator, the complete system, tester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. 109-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly. hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Lubricating Fluid
Part No. LF5050
This fluid is used to lubricate the glands of the pitot static test adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK9872
Two sets of spare seals are stowed in the case.
Manual - Part No. 444-109C-723
One manual is supplied with each kit. The equipment is enclosed in a case assembly - Model No. 106XD-109C-723.
This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test
如您需要Allouette Lama飞机适用的Pitot Test Adaptor皮托管测试适配器PS59872-3-4，或是Pitot Pre-Test & Assembly Integrity Fixture皮托管预测试和装配完整性夹具 PT421-9872,联系我们吧。
| Aircraft Type | Pitot Test Adaptor | Pitot Probe Part No. | Static Test Adaptor Blanking Adaptor | Miscellaneous Adaptor | Pitot Pre-Test & Assembly Integrity Fixture | Air Data Accessories Kit |
|---|---|---|---|---|---|---|
| Agusta A109 NEXUS | PS59872-3-4 | 855GR | PT421-9872 | ADA109C-723 |
| Aircraft | Agusta A109 NEXUS |
|---|---|
| Air Data Accessories Kit | ADA109C-723 |
| Category | Other Helicopter |
| Pitot Pre-Test & Assembly Integrity Fixture | PT421-9872 |
| Pitot Test Adaptor | PS59872-3-4 |
| 飞机 | Agusta A109 NEXUS |
|---|---|
| Air Data 附件套件 | ADA109C-723 |
| 类别 | 其他直升机 |
| Pitot预测试和装配完整性夹具 | 件号PT421-9872 |
| 皮托管测试适配器 | PS59872-3-4 |
AIR DATA ACCESSORIES KIT MODEL No. ADA109C-723 AGUSTA A109 NEXUS
The kit contains the equipment required to test from source the complete pitot & static air data system on the Agusta A109 Nexus, as well as the means of pre-testing all adaptors and hoses prior to being fitted to the aircraft.
Pitot Static Test Adaptor
Part No. PS59872-4-6 (2 req’d.)
These units fit the pitot static probes 855GR located on the nose and when installed they will isolate and test each system separately or simultaneously.
Pre-Test Probe
Part No. PT421-9872 (2 req’d.)
When this unit is inserted into the adaptor and the extension hose is connected from the pneumatic generator, the complete system, tester, hoses and adaptors can be tested before fitting to the aircraft.
Pitot Test Hose Assembly
Part No. 109-7270 (1 req’d.)
This hose is connected to each pitot inlet of the adaptors and is fitted with double acting quick disconnects for use when it is desirable to test only one pitot system. The extension hose to the pneumatic generator is included on this assembly. hose assembly. The extension hose to the pneumatic generator is included on this assembly.
Lubricating Fluid
Part No. LF5050
This fluid is used to lubricate the glands of the pitot static test adaptors. It is recommended that a small amount be placed on the glands before installing adaptor on pitot head. This will ensure smooth installation onto the pitot probe.
Seal Kit - Part No. SK9872
Two sets of spare seals are stowed in the case.
Manual - Part No. 444-109C-723
One manual is supplied with each kit. The equipment is enclosed in a case assembly - Model No. 106XD-109C-723.
Static Test Hose Assembly
Part No. 109-5160 (1 req’d.)This assembly attaches to the static fittings. The double acting quick disconnects operate in the same manner as that on the pitot test
如您需要Allouette Lama飞机适用的Pitot Test Adaptor皮托管测试适配器PS59872-3-4，或是Pitot Pre-Test & Assembly Integrity Fixture皮托管预测试和装配完整性夹具 PT421-9872,联系我们吧。
